Not every frontage needs a two-metre wall of gate. This design combines a solid lower panel, which hides cars and keeps children and pets in, with an open slatted band across the top that lets light through and keeps the entrance feeling welcoming.
It is the only gate in our range that goes as low as 1000mm as well as up to 2000mm, in 200mm steps, so it suits everything from low front-garden walls to taller boundaries. Lower heights are useful where planning rules limit gates next to a road; taller versions give more privacy from passing traffic.
Finish and fitting
The textured powder-coated aluminium resists corrosion and fading and needs no painting. Widths run from 3000mm to 4000mm. Each pair arrives assembled with four adjustable wall-mounted hinges and two floor-mounted hinges. It can be hung brick-to-brick or on 50mm or 100mm posts, opening into the drive or out towards the road, and works by hand or with above-ground or underground gate motors. Posts are sold separately; matching aluminium posts are available.
Frequently asked questions
Do I need planning permission for a driveway gate?
In England, gates next to a road used by vehicles can usually be up to 1 metre high without planning permission, and up to 2 metres elsewhere. Rules differ for listed buildings and conservation areas, so check with your council if you’re unsure.
Which height should I choose?
Most people match the gate to the height of the wall or fence either side, so the boundary runs level. Measure your piers or posts and we can help you choose.
Supply only, or supplied and fitted in Sussex
Sussex Gate Services has 30 years’ experience installing, servicing and repairing gates across Sussex and the South East. Order the open top gates on its own for your own installer, or ask us for a fitted quote covering posts, hanging and any electric gate automation. Our guide prices give a feel for typical project costs.






