Vertical boarding makes a gate look taller and more substantial, and on this tracked sliding gate it creates an unbroken privacy screen across the whole opening. With heights up to 2200mm it is one of the tallest gates we offer, ideal beside busy roads or where the house sits close to the entrance.
Sliding gates don’t need room to swing, so they suit short drives where cars park near the gate, drives that slope up from the road, and very wide openings.
Running gear and automation
The gate runs on a ground track for steady, well-aligned movement. Choose Automated for a Roger Technology TW90 brushless motor with B70 controller, encoder-controlled travel, built-in radio receiver, dual photocells and steel-cored nylon racking, or Manual if you are opening it by hand or fitting your own motor.
Sizes
Widths from 3500mm to 5500mm, heights of 1800, 2000 or 2200mm, in Jet Black, Anthracite Grey or a custom RAL colour.
Frequently asked questions
When is a sliding gate better than swing gates?
When there is little space behind the entrance, when the drive slopes, or when the opening is very wide. A sliding gate moves along the boundary instead of into the drive.
Can I use my own gate motor?
Yes. Choose the Manual option, which is supplied without automation, and your installer can fit a compatible sliding gate motor.
Installed by a local Sussex gate company
Sliding gates depend on good groundwork, so most customers have us fit them. Sussex Gate Services has 30 years’ experience with sliding gates across Sussex and the South East, and we can survey your entrance, lay the foundations, install the vertical sliding gate and commission the automation. Request a site visit and quote, or see our guide prices.




