Aluminium Cantilever Sliding Gate – Fully Boarded

From £5,722.80

  • No ground track across the drive
  • Fully boarded for maximum privacy
  • 3000-5500mm openings, 1600-2000mm high
  • Manual, or automated with a Roger Technology TW90 (+£1,440)
  • Motor hidden inside the tower post
  • 3-year warranty
  • Manufacturer's warranty
  • Made to your chosen size
  • Installation across Sussex & the South East

Need it fitted? Get an installation quote

A cantilever gate runs on rollers set to one side of the opening, with a counterbalance section behind it, so nothing runs across the driveway itself. There is no track to fill with gravel, leaves or ice, no bump to drive over, and it works on block paving, tarmac or shingle.

This version is fully boarded from top to bottom, giving the most privacy and security of our three cantilever designs. It suits private drives and commercial yard entrances alike.

Automation built in

Choose Automated and the gate comes with a Roger Technology TW90 brushless motor and gearbox housed inside the main tower post, a B70 series digital controller, a 4096 PPR magnetic encoder for precise travel without mechanical limit switches, a 2-channel radio receiver and two hard-wired safety photocells. The steel-cored nylon gear rack is hidden inside the aluminium bottom beam. Choose Manual to open it by hand or if your installer is supplying their own motor.

Sizes and space needed

Openings from 3000mm to 5500mm wide, in heights of 1600, 1800 and 2000mm. Up to 5500mm wide the gate uses a 45° tension bar; with a complete board frame it goes up to 5000mm. The gate slides back along your boundary, so you need a clear run beside the entrance for the leaf and its counterbalance.

Frequently asked questions

How much space do I need beside the opening?

A cantilever gate is longer than the opening because of its counterbalance tail, and it needs a clear, straight run beside the entrance to slide into. We confirm the exact space on a site visit.

Can I add an intercom or keypad?

Yes. The automated gate can be linked to intercoms, keypads and remote fobs, and we install intercom and entry systems as well.

Installed by a local Sussex gate company

Sliding gates depend on good groundwork, so most customers have us fit them. Sussex Gate Services has 30 years’ experience with sliding gates across Sussex and the South East, and we can survey your entrance, lay the foundations, install the cantilever gate and commission the automation. Request a site visit and quote, or see our guide prices.

Specifications

DimensionsN/A
Colour

Jet Black (RAL 9005), Anthracite Grey (RAL 7016), Custom RAL Colour

Gate Height

1600mm, 1800mm, 2000mm

Gate Width

3000mm, 3250mm, 3500mm, 3750mm, 4000mm, 4250mm, 4500mm, 4750mm, 5000mm, 5250mm, 5500mm

Operation

Manual, Automated